Methods
Waste#
The waste section of a report: the bin weighed after each procedure, per stream or as one amount, with the hospital's route to the processor; the waste per product beside it, never added; recycled material at zero under cut-off.
In short
- The bin is weighed after each procedure, per stream or as one amount, and follows the hospital's route to the processor.
- Waste per product is a second method shown beside it; the two are never added.
- Recycled material counts 0, under the cut-off of BAFU:2026.
- Substitution is a sensitivity only and never enters the result.
Methods of ClinImpact 2.21. Reports name the version they were computed with; the changelog says what changed.
Contents
A procedure's waste is weighed and costed, either per stream or as one amount (all bags together). Five streams are weighed separately after each procedure:
- hazardous medical waste (RMA);
- residual waste;
- plastic;
- paper and cardboard;
- sharps.
For each procedure the record holds the weight in kg of each stream that was weighed (0 is a weight; a stream left empty was not weighed), or one weight for all streams together.
For each hospital it holds a route for each stream and one route for waste weighed as one amount. Each route is a BAFU disposal dataset per kg, with the distance by road to the processor and where both came from. The waste-management datasets are in the catalogue for that picker only.
| Line | Formula |
|---|---|
| Disposal | mean kg over the weighed, non-excluded procedures × number of procedures counted × factor per kg of the disposal dataset |
| Transport to processor | that mass / 1000 × km → t·km × factor of Transport, freight, lorry, fleet average {CH} |
Weighed as one amount#
When no procedure (not excluded) is weighed per stream, the mean of the weighed amounts is applied to every procedure through the hospital's one route, so that the per-procedure figure is the mean of the weighed ones. The line says how many procedures were not weighed and which weighings were excluded, with the reason given.
Until the hospital has recorded that route, the report carries one line saying that waste is not counted.
Per stream#
Once a procedure (not excluded) is weighed per stream, the project is counted per stream. Each stream with a weight gets its own disposal and transport lines ("Waste > stream > …"), using the mean over the procedures that weighed that stream, applied to every procedure except those weighed as one amount.
- A procedure weighed per stream that left a stream empty takes that stream's mean.
- A procedure weighed as one amount counts its own weight, not a mean, through the one route.
- Excluding a procedure from the mean excludes all its streams, and the procedure then takes the means of the others.
- A stream nobody weighed has no line.
A procedure's total is the sum of its streams.
Routes per stream#
A stream follows the hospital's own route for it. When the hospital has set none, it follows a default route (Belgium/Flanders, after the study team's answer that the standard routes are used). The study team confirmed the treatments: hazardous medical waste and sharps go to hazardous waste incineration (Indaver MediPower, Antwerp), residual waste to municipal incineration, plastic and paper to recycling. The distances depend on the hospital and its collectors; the 30 km below is an estimate, to be confirmed, and every line that uses a default says so:
| Stream | Default route | Distance |
|---|---|---|
| Hazardous medical waste (RMA) | Disposal, hazardous waste, 25% water, to hazardous waste incineration {CH} | 30 km |
| Residual waste | Disposal, municipal solid waste, 22.9% water, to municipal incineration {CH} | 30 km |
| Plastic | Recycled (cut-off: 0, no transport) | — |
| Paper and cardboard | Recycled (cut-off: 0, no transport) | — |
| Sharps | Disposal, hazardous waste, 25% water, to hazardous waste incineration {CH} | 30 km |
| PMD (plastic, metal and drink cartons), since 2.21.0 | Recycled (cut-off: 0, no transport) | — |
| Cloths and textiles, since 2.21.0 | Disposal, textiles, soiled, 25% water, to municipal incineration {CH} | 30 km |
The routes of PMD and cloths are defaults of the app, not yet confirmed by the study team.
BAFU:2026 has no dataset for infectious or hospital waste, so the hazardous waste incineration dataset stands in for it. A recycled stream counts 0 under the cut-off rule and is not driven to the processor (see Recycled below). Only plastic, paper, PMD and cloths can be recycled.
Why the recycled streams take the cut-off rule rather than a dataset, checked against the catalogue on 2026-10-27: BAFU:2026 offers no current recycling dataset for plastic, paper or board (its only ones, xx Recycling PE {RER} and xx Recycling mixed plastics {RER}, are marked obsolete and carry no burden), no "market for" datasets that would carry the transport to the processor, and no dataset for hospital or infectious waste.
Of its 923 disposal datasets, only the two photovoltaic "avoided burden" datasets and one window-frame dataset carry a negative factor, and none of those is a route here, so no treatment line ever credits a recovery. A hospital that wants another treatment for a recyclable stream picks any per-kg disposal dataset for it, and the report names that choice.
Waste per product, a second method#
A component can be marked "disposed as" a per-kg disposal dataset. Its own mass lines (mass units only; process steps weigh nothing, see Methods: Transport), times its effective count down the product's tree and the units consumed, go to that dataset. The disposed mass then travels the hospital's distance to the processor, as above. Components of consumed products that have a mass but no disposal are named on a "not covered" line.
The two methods describe the same waste and are never added. The headline takes one basis per project:
- When any procedure was weighed, that basis is the weighed bin, and the report shows beside it the waste per product, the total with the waste per product in place of the weighed waste, and the difference (per product minus weighed, in the unit and as a share of the weighed).
- Otherwise the basis is the waste per product itself.
Each published version records its basis. The difference shows how close weighing comes to the full calculation.
Rubber and latex go to Disposal, rubber, unspecified … to municipal incineration, and textiles to Disposal, textiles, soiled … to municipal incineration. The catalogue has no infectious-waste dataset, and Disposal, hazardous waste … to hazardous waste incineration stands in for it.
Recycled#
A component can also be marked Recycled. BAFU:2026 has no current recycling dataset for paper, board or plastics, and its system model is cut-off: recycled material leaves the product's system without burden, and its collection and sorting belong to the recycled material. Recycled is therefore that rule rather than a dataset.
A recycled component counts 0 under every indicator. Its line names the cut-off rule as its source, and its mass is left out of the transport to the processor. No avoided-burden credit is given, as that would contradict the cut-off model of BAFU:2026.
The weighed bin cannot be marked recycled, because it is a mixed stream to incineration or landfill. Recycled is meant for packaging that is recycled instead of incinerated.
Under the cut-off of BAFU:2026, the burdens of collection, sorting, washing and regranulating belong to whoever uses the recycled material, and not to the product that discards it. BAFU's own "xx Recycling PE {RER}" (obsolete) is a zero-burden dummy: all 25 EF 3.1 categories are 0, as computed in openLCA on 2026-10-08. BAFU has no recycled PE granulate and no PE recycling process.
The Standard report names the recycled components (1.4, with their grams), counts their lines in Table 3 ("recycled (cut-off, 0)") and lists the cut-off rule in the dataset annex.
Substitution, as a sensitivity only#
Recycling LDPE also saves virgin plastic, and a paper may want to state how much in one correctly described sentence. Substitution (avoided burden) belongs to a different system model from the cut-off of BAFU:2026, so it never enters the result.
For each recycled component's own mass material with a recycling route, the credit is kg × (ratio × the virgin dataset's factor − the recycling burden), per indicator.
- The virgin dataset is the one the recyclate replaces (for packaging film, the granulate rather than the film).
- The recycling burden is not in BAFU. It comes from the literature, with its reference, per indicator, and is entered by an administrator.
The credit is frozen with each version under every indicator. It is shown:
- as a row in the Standard report's sensitivity table;
- in an annex per indicator (where an indicator such as eutrophication can come out worse once washing is counted);
- in its own Excel sheet;
- as one sentence in the methods text.
An indicator without a recycling burden in the literature gets no credit and says so. A recycled-content scenario ("made from recycled LDPE") is not possible with BAFU:2026 alone.
Yield and upper bound#
The recycling burden and the virgin material it replaces are both per kg of pellets, so the credit is kg × yield × (ratio × virgin − burden).
- The yield defaults to 0.85. Zeilerbauer et al. 2024 (Resour Conserv Recycl 209:107807) put the plastic reject of an LDPE film recycler at about 15 % of the input, with other waste fractions on top, so 0.85 is at most what a kg yields.
- The ratio defaults to 1. The same paper reports substitutability of 71–85 % for recycled PET and a 70 % break-even for HDPE, which makes 1 the favourable end.
Without a recorded recycling burden the credit is still computed, as an upper bound, and every place that shows it says so.